CB-Draw Back Collet Chuck
Feature
- The drawback clamping mechanism, combined with the material stop block, allows precise positioning of the workpiece feeding length, thereby enhancing length accuracy control.
- With axial and radial clamping torques, it is suitable for rough and heavy machining, as well as large diameter or short workpieces.
- The material stop block and dust cover are interchangeable, balancing application versatility and chip protection functionality.
Specification
| Art. No. | Clamping range | L1 | L2 | D1 | D2 | D3 | D4 | D5 | D6 | Max speed min | Collet | Total stroke | Maximum draw bar pull kN | Clamping force kN | Max.Pressure (Kgf/cm2) | Weight (Kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CB32 | 4~32 | 70.5 | 17 | 137 | 120 | 84 | 70 | M8 | M54x1.5 | 8000 | SK32 | 6mm | 25 | 60 | 2.8 | 6.5 |
| CB42 | 4~42 | 69 | 17 | 137 | 138 | 104 | 90 | M8 | M54x1.5 | 7000 | SK42 | 6mm | 35 | 70 | 2.8 | 7.8 |
| CB52 | 4~52 | 72.5 | 17 | 155 | 156 | 106 | 92 | M8 | M74x1.5 | 6500 | SK52 | 6mm | 40 | 80 | 3.2 | 13.6 |
| CB65 | 5~65 | 78 | 17 | 155 | 156 | 122 | 110 | M8 | M74x1.5 | 6000 | SK65 | 6mm | 45 | 90 | 3.2 | 19 |
| CB80 | 5~80 | 85 | 20 | 215 | 190 | 152 | 132 | M12 | M94x1.5 | 5500 | SK80 | 6mm | 50 | 100 | 3.0 | 29.1 |
| CB100 | 42~100 | 102 | 20 | 215 | 190 | 215 | 190 | M12 | M120x1.5 | 5000 | SK100 | 6mm | 65 | 130 | 3.0 | 36.1 |
| CB120 | 62~120 | 102 | 20 | 250 | 215 | 250 | 225 | M12 | M132x1.5 | 4000 | SK120 | 6mm | 70 | 140 | 4.0 | 57.4 |